Brand Name: TEKAIBIN
Model Number: TZ56S
Place of Origin: Zhejiang, China (Mainland)
Size: 9*9.6*5.8cm
Max. Current: 6A
Max. Voltage: 230V/50Hz
Mechanical Life: more than 10 years
Operating Temperature: 0~40
Operation range: up to 100 feet
Color: white, silver, golden/champagne
Electricity consumption: very low
Controllable Z-Wave Groups: 2
Indication light: LED
Max Load: 1380W
Front Dimension: 8.6cm*8.6cm
Back Dimension: 3.15cm*4.95cm
The TZ56S Z-Wave Wireless Wall Mounted Switch is a component of the TEKAIBIN lighting control system. This Wall Mounted Switch is designed to work with other Z-Wave enabled devices. Z-Wave nodes of other types can be added to the system and will also act as repeaters if they support this function of repeating the signal received to other modules in the system.
As part of a Z-Wave network, the TZ66S will also act as a wireless repeater to insure that commands intended for another device in the network are received. This is useful when the device would otherwise be out of the radio range of the wireless controller.
SPEC:
Voltage: 230 VAC, 50 Hz
Signal (Frequency): 868.42 MHz
Maximum Load – Resistive: 6 amps (1380 watts) maximum, 230 VAC
Range: Up to 30 meters line of sight between the Wireless Controller and /or the closest Z-Wave Receiver Module.
Model | Voltage | Max Load | Frequency Range | Color | Controllable Z-Wave Groups |
TZ56D |
230VAC/50HZ | 1380W | 868.42MHZ(EU) / 869MHZ(RU) | white, silver, golden | 4 |
TZ56S | 230VAC/50HZ | 1380W | 868.42MHZ(EU) / 869MHZ(RU) | white, silver, golden | 2 |
Model | Controllable Z-Wave Groups |
Function | Max Load | Voltage | Appearance | lighting |
TZ56S | 2 | ON/OFF Switch | 1380W | 230VAC/50HZ | same | Capable of controlling fluorescent lighting |
TZ55S | 2 | Dimmer Switch | 300W | 230VAC/50HZ | same | For use only with hard-wired incandescent lighting |
YOUDO takes over a decade to offer you good quality products and best service !